PRODUCTS

STRENGTH OF STEEL

Fabrimetal is constantly striving for excellence, maintaining a strong focus on the production of FM TMT® rebars that meet international quality standards. Economical and designed to ensure greater strength and superior bonding between steel and concrete, FM TMT® rebars meet all the requirements of modern construction, without compromising the environment.

In addition to steel rebars, Fabrimetal offers a wide range of complementary products, reinforcing its commitment to providing complete and efficient solutions for the construction sector.
With an installed production capacity of 180,000 tons per year, the company supplies a diverse and competitive range of products designed to meet the needs of construction companies, distributors, retailers, and individual clients.

RODS

ANGLES

BARS

PROFILES

PRODUCT CHARACTERISTICS

All FM TMT® products, whether rods or complementary (angles, bars and profiles), are produced from recycled metal scrap, purchased in Angola, and have the following advantages:

- a. Requires less energy than steel production from iron ore;
- b. Reduces the need for landfills;
  c. Prevents the accumulation of abandoned steel waste.

They also have:

Greater mechanical strength, better tensile strength and excellent elongation percentage.
Greater ease of bending, better weldability and greater durability.
Good corrosion resistance properties and greater seismic resistance.
Greater thermal stability, ideal for high temperatures. FM TMT® registered trademark visible on all products (rods, angles, bars and profiles) produced locally.

PACKAGING

Automatic packaging, with appropriate labeling, in bundles/ lots of up to 2 tons and 12 meters long (rods). Complementary products available in 6 meters (angles, bars and profiles).
Each bundle/lot contains a standard number of units, grouped by size and length, and securely tied with wire at 2.4 meter intervals (in 5 or 6 points).
Each bundle/lot is identified with a unit label, indicating the international standard used, the dimension, the number of units and the production date.

DIMENSIONS

Available diameters for Rebars: 8, 10, 12, 16, 20, 25 and 32 mm.
Standard length: 12 m
Possible lengths on request: 3, 6 and 9 m;
Complementares (Cantoneiras, Barras e Perfis) disponíveis em 6 mts.

REBARS

Analysis – Nominal Diameter (mm)	Profile Area (mm²)	Mass by Length			Weight - 1 Rod (kg)	Parts / 1 Ton
Analysis – Nominal Diameter (mm)	Profile Area (mm²)	Nominal (kg/m)	Standard Deviation (%)	min - max (kg/m)	Weight - 1 Rod (kg)	Parts / 1 Ton
8	50,285	0,395	+/- 4.5%	0,377 - 0,413	4,740	211
10	78,570	0,617	+/- 4.5%	0,589 - 0,645	7,404	135
12	113,140	0,888	+/- 4.5%	0,848 - 0,928	10,960	94
16	201,142	1,580	+/- 4.5%	1,509 - 1,651	18,960	53
20	314,290	2,470	+/- 4.5%	2,359 - 2,581	29,640	34
25	491,071	3,854	+/- 4.5%	3,687 - 4,027	46,248	22
32	804,570	6,315	+/- 4.5%	6,031 - 6,599	75,780	13

Analysis	C (%)	P (%)	S (%)	N (%)	Cu (%)	C Eq. (%)
Leak	0,22	0,05	0,05	0,012	0,8	0,5
Final Product	0,24	0,055	0,055	0,014	0,85	0,52

FM TMT RODS	Resistance (YS) N/mm²	Tensile Strength (UTS) N/mm²	Resistance Ratio (UTS/YS)	Minimum Stretching Fracture Point (%)	Minimum Stretching Max. Strength (%)
AB500 / AB500NR	500	545	1.09	16	12
A400NR	400	490	1.23	18	14
AB500NR SD	500	600	1.20	20	15
A400 NR	400	460	1.15 - 1.35	18	8
ASTM A 615/A615 M-2020 GRAU 60	420	550	1.10	9	-
ASTM A 706A/A A706M 2022	420-540	420-5400	-	14	-

COMPLEMENTARY PRODUCTS

ANGLES
Dimension (mm)	Nominal (kg/m)	Deviation (%)	Minimum (kg/m)	Maximum (kg/m)	Parts per 1 ton
20x20x2	0,612	±6%	0,576	0,649	272
30x30x3	1,36	±6%	1,278	1,442	123
40x40x4	2,4	±4%	2,304	2,496	70
50x50x5	3,77	±4%	3,619	3,921	44
60x60x6	5,42	±4%	5,203	5,637	31

BARS
Dimension (mm)	Nominal (kg/m)	Deviation (%)	Minimum (kg/m)	Maximum (kg/m)	Parts per 1 ton
20x3	0,471	±3%	0,576	0,649	272
25x3	0,589	±3%	1,278	1,442	123
30x3	0,707	±3%	2,304	2,496	70
40x3	0,942	±3%	3,619	3,921	44
50x3	1,570	±3%	5,203	5,637	31

PROFILES
Dimension (mm)	Nominal (kg/m)	Deviation (%)	Minimum (kg/m)	Maximum (kg/m)	Parts per 1 ton
80x45x6	8,60	±4%	8,256	8,944	20
100x50x6	10,60	±4%	10,176	11,024	16
120x55x7	13,40	±4%	12,864	13,936	13
140x60x7	16,00	±4%	15,36	16,64	11

EN 10024-2:S355JR – THICKNESS ≤ 16mm
Analysis	C (%)	P (%)	S (%)	N (%)	Cu (%)	C Eq. (%)
Leak	0,17	0,035	0,035	0,012	0,550	0,35
Final Product	0,19	0,045	0,045	0,014	0,600	–

EN 10024-2:S275JR – THICKNESS ≤ 16mm
Analysis	C (%)	P (%)	S (%)	N (%)	Cu (%)	C Eq. (%)
Leak	0,21	0,035	0,035	0,012	0,550	0,40
Final Product	0,24	0,045	0,045	0,014	0,600	–

Mechanical Properties – Complementary Products
Products Complementary	Resistance (YS) N/mm²	Tensile strength (UTS) N/mm²	Minimum Elongation – Fracture Point (%)
S235JR	235 min	360–510	19 >1.5–≤2 20 >2–≤2.5 21 >2.5–3.0 26 ≥3–≤40
S235JR	235 min	360–510	19 >1.5–≤2 20 >2–≤2.5 21 >2.5–3.0 26 ≥3–≤40
S275JR	275 min	430–580	17 >1.5–≤2 18 >2–≤2.5 20 >2.5–3.0 23 ≥3–≤40
S275JR	275 min	430–580	17 >1.5–≤2 18 >2–≤2.5 20 >2.5–3.0 23 ≥3–≤40